Voltage Testers and Meters

VT200 Voltage Tester-Neon Type

Compact. Fits in tight spaces.
High visibility neon voltage indicator: 120, 208 to 240, 440 to 600 AC; 120, 240, 400, 600 VDC.
Positive or negative DC pole identified by neon lamps..
Provision for quick prod storage in case..
Case serves as prod holder for one-hand operation.
Replaceable probe tips.
Continuous duty rated through 480V
Dimensions: 4-9/16" x 3-1/16" x 7/8".
Made in U.S.A.
VT200LL Heavyduty leather case.

Dual voltage indication: Solenoid vibration sensing and electronic neon visual indication.
Positive AC/DC voltage identification: 120, 240, 400, 600 VDC 60/50 Hz; 120, 240, 600, VDC.
Positive or negative DC pole identified by neon lamp.
Replaceable leads.
Retractable and locking, spring loaded shrouds protecting metal probes.
Durable metal probes capable of piercing insulation covered conductors.
Self-extinguishing, high impact sealed case and prod assemblies preventing dirt, dust and small objects from enter ing the tester.
Provision for quick prod storage in case..
Case serves as prod holder for one-hand operation.
Test lead strain relief assembly.
Made in U.S.A.
VT150LL Heavyduty leather case.

Same features as VT150.
High visibility neon voltage indicator: 120, 208 to 240, 440 to 600 AC; 120, 240, 400, 600 VDC.
Fused prods.
Clear plastic see-through prods for easy identification of blown fuses.

Three voltage indications: Solenoid vibration sensing, electronic neon visual indication, and audible buzzer.
Positive AC/DC voltage identification: 6 to 600 VDC 60/50 Hz.
Automatic testing for continuity through 300 K ohms.
Electronic buzzer indication for AC/DC voltage and continuity.
Positive or negative DC pole identified by neon lamp.
Replaceable leads.
Retractable and locking, spring loaded shrouds protecting metal probes.
Durable metal probes capable of piercing insulation covered conductors.
Self-extinguishing, high impact sealed case and prod assemblies preventing dirt, dust and small objects from enter ing the tester.
Includes A76 batteries.
Provision for quick prod storage in case..
Case serves as prod holder for one-hand operation.
Test lead strain relief assembly.
Made in U.S.A.
VT154LL Heavyduty leather case.
VT154B Replacement batteries.

"Volt Stik" detects voltage from 25 to 122,000 VAC, without any physical connections.
"Volt Stik" indicates voltage with audible and visual signals.
Includes 1 9 Volt alkaline battery.
Low range: 25 VAC to 1500 VAC
High range: 1500 VAC to 122,000 VAC.
Made in U.S.A.

Hold tip of "Volt Stik" to possible voltage source and switch the unit to the correct range. Listen and look for indication.

Low Range:

"Volt Stik" will start to "tic" and the LED will light if there is greater than 25 VAC.
High Range:

"Volt Stik" will start to "tic" and the LED will light if there is greater than 1500 VAC.

It performs a complete lighting fixture test which includes lighting the lamp with no power connection.

The LT130 tests the following lamps:

Features:

Audible voltage indication: 5, 12, 24, 48, 120, 208 to 240, 277, 440 to 600 VAC/DC.
Audible continuity to 100 K ohms.
Test ballast, capacitors, diodes, igniters, and photoelectric controls.
Telescoping antenna that fully retracts into the housing.
Prod holder for two-handed operation
Replaceable antenna.
Separate battery compartment.
Neoprene voltage lead and alligator clip assemblies.

Unit includes:

Let us know how well we are serving you or how we could improve. feedback@etcon.com